Welding Wire Purchasing, Wholesale, Manufacture Quotes page 2
  • Home
  • >
  • Products

Welding Machine

  • MMA Welding Machine

    MMA Welding Machine

    MMA Welding Machine MMA140/160/180/200GD Features: 1. Single board design 2. Single phase power supply. 3. MMA mode with VRD control. 4. Can be used as lift arc TIG. 5. With perfect over current, overheating, short voltage protection. 6. Small size, light weight, portable and easy operation for family users. Scope of application: MMA: 1. Welding consumables: Φ2.5-3.2mm Acid electrode Φ2.5-3.2mm Basic electrode 2. Welding thickness: MMA140-160A: 1.5mm-5mm steel MMA180-200A: 2mm-6mm steel TIG: Tungsten needle: 140-160 Φ1.6-2.4 180-200 Φ1.6-3.2 Gas: Argon gas MMA140/160/200 Features: 1. Adopt advanced 100KHZ high frequency inverter technology. 2. built-in arc force and hot start function, easy to start, high quality welding, small splash, good weld appearance. 3. With ability of automatic over-voltage, under voltage, over-current protection, safe and reliable. Scope of application: 1. Welding consumables: Φ2.5-3.2mm Acid electrode Φ2.5-3.2mm Basic electrode 2. Welding thickness: MMA140-160A: 1.5mm-5mm steel MMA180-200A: 2mm-6mm steel

  • MIG Welding Machine

    MIG Welding Machine

    MIG Welding Machine MIG 135/155 Features: 1. Built-in 0.9kg wire spool. 2. MMA/MIG Mode 3. With output polarity conversion, can weld flux core and solid wire. 4. With perfect overcurrent, overheating, short voltage protection. 5. Under MIG mode. 6. Small size, light weight and portable. 7. Single phrase power supply for home use. Scope of application: 1. Consumbles: contact tip, nozzle, welding rod 2. Welding workplace: 1-4mm, carbon steel. stainless steel MIG 160/175/200GD Features: 1. 5kg and 1kg wire coil interchange. 2. 3 in 1 function, including MIG/MAG, MMA, Lift TIG 3. MMA mode with adjustable VRD control, usercan set; arc force can adjust seperately. 4. 2T/4T mode. 5. At MIG/MAG mode have voltage, current, inductance unified adjusting function. 6. With output polarity conversion. 7. With perfect over current, over heating, short voltage protection. 8. Current and voltage figure have seperate digital display. 9. Complete with spool gun connector. Scope of application: 1. Consumbles: contact tip, nozzle, tungsten needle, welding rod 2. Welding workplace: 1-6mm, carbon steel. stainless steel MIG 200/250/300GN 1. Built-in wirefeeder, equipped with cylinder tray. 2. MIG/MMA/LIFT TIG Mode. 3. MMA mode with VRD control. 4. With output polarity conversion. 5. Under MMA mode can be used as lift arc TIG. 6. With perfect overcurrent, overheating, under voltage protection. 7. Current and voltage figure with seperate digital display. 8. 3 Duct design( Waterproof, anti dust, anti corrosion). 9. The high rate of sustained load can be used for industrial users. Scope of application: Mig200/250/300: Φ0.6-1.2 flux-cored wire Mig200: Φ0.6-1.0 carbon steel wire,5/15KG MIg250/300: Φ0.6-1.2 carbon steel wire,5/15KG Consumbles: 200A: Φ2.5-4.0, acid electrode, basic electrode 250A/300A: Φ2.5-5.0, acid electrode, basic electrode Welding workplace: 1-6mm, carbon steel, stainless steel

  • Multifunctional Digital Pulse Welder

    Multifunctional Digital Pulse Welder

    Multifunctional Digital Pulse Welder CT312/416GD CT416 Features: 1. 3 in 1 function, include CUT,MMA, and HF TIG. 2. MMA mode with adjustable VRD control. 3. With perfect over current, over-heating, under voltage protection. 4. Current digital display. 5. Pressure adjustment and indicate on panel. 6. Single board design. Scope of application: Cutting thickness: 30A: 10mm, carbon steel, stainless steel 40A: 12mm, carbon steel, stainless steel MMA: Φ2.5-3.2mm, acid electrode, basic electrode Φ2-6mm, carbon steel, stainless steel TIG: Φ1.6-2.4mm, tungsten needle Φ0.6-4mm, carbon steel, stainless steel

  • Plasma Cutting Machine

    Plasma Cutting Machine

    Plasma Cutting Machine Features: Using V-MOS inverter circuit and TGBT switching elements, advanced circuit design, high efficiency, small size, light weight, good starting arc performance. High-speed, high temperature, high energy plasma gas follow to heat and melt the material being cut. The use of compressed air for industrial gases and exclude the molten metal stream, so as to achieve the purpose of cutting. Applications: 1. Aplly sheet cutting, cutting neat, smooth, small deformation, stainless steel and all kinds of metal material cutting is very convenient. 2. Suitable for cutting cabon steel, high speed steel, tool steel, stainless steel, copper, aluminum and most of ferrous and nonferrous metals.

  • TIG Welding Machine

    TIG Welding Machine

    TIG Welding Machine TIG160/200D Features: 1. Adopt advanced 100KHZ high frequency inverter technology. 2. With TIG/MMA two functions. 3. Unique high frequency arc start, higher success rate of arc striking. 4. With ability of automatic over-voltage, under-voltage, over-current protection, safe and reliable. Scope of application: 1. Carbon steel, stainless steel 2. Tungsten needle: 140-160 Φ1.6-2.4 180-200 Φ1.6-3.2 Gas: Argon gas TIG 200/250/315ACDC Features: 1. Adopt advanced 100KHz high frequency inverter technology. 2. With TIG/MMA teo funtions. 3. With remote and panel conrol function, foot control is available. 4. With pre-flow and post-flow adjustment, current adjustment and clearance with adjustment. 5. Unique high frequency arc start, higher success rate of arc striking. 6. With ability of automatic over-voltage, under-voltage, over-current protection, safe and reliable. Scope of application: AC: Φ1.6-2.4, tungsten needle, Argon aluminum, Magnesium, Aluminum alloy and other non-ferrous metals Thickness: 1-4 mm DC: Carbon steel, stainless steel Thickness: MMA: 2-6mm TIG: 0.6-6mm

  • Pulsed Argon Arc Welding Machine

    Pulsed Argon Arc Welding Machine

    Pulsed Argon Arc Welding Machinev Features: The use of SCR flow circuit, easy maintenance, low noise, high efficiency; high-frequency high-pressure arc, high success rate; welding current is gentle and stable, uniform weld appearance. By adjusting the pulse current and pulse frequency, the required weld width, depth of dissolution, and number of weld ripples can be controlled. This series welder has DC TIG welding, AC TIG welding, DC pulse TIG welding, exchange hands welding, DC manual welding five functions. Applications: DC pulsed argon arc welding is applicable to stainless steel, copper, titanium and carbon steel. AC argon welding is suitable for welding aluminum, magnesium, aluminum alloys, brass and other materials.

Welding Auxiliary Machine

  • Welding Electrode Drying Oven

    Welding Electrode Drying Oven

    Welding Electrode Drying Oven Type JAPAN type   AMERICA type   US standard   50℃-300℃ EURO type   FRANCE type   GERMAN type   KOREAN type   Norway Type   Denmark Type   AM-200 Dry Oven   NG-20 Drying Cylinder   DYH series oven (drawer type)   K-300 &900 electrode oven

  • Welding Water Cooler

    Welding Water Cooler

    Main features of 20L tig water cooler: Economical and practical water tank, light weight, small size, easy to move. The water storage tank is integrally formed with high-temperature-resistant materials which is preventing water leakage. Using a diaphragm pump, avoid scale incrustation after long time using. Transparent water inspection Windows, in order to timely grasp the water level. Forward filling nozzle which is convenient to water injection. The unique design of wind tunnel type radiator cooling volume increased by 20% than the others’ products.

  • Welding Positioner

    Welding Positioner

    Welding Positioner Small-block positioner driven by DC motor can achieve step-less speed regulation. It mainly used for welding parts’ conducting, surfacing and cutting. Turning and overturning make the work piece to reach a reasonable welding and fitting angle by the elevating of the working table, the turning of the working table is frequency conversion which can get a satisfied welding speed. There are three kinds of configuration for the control system: button digital control, switch digital control and switch relay control. It can realize the combination control with other machines,such as welding equipment. It designed with professional anti-electromagnet to avoid high-frequency interference.

  • Welding Roller

    Welding Roller

    Welding Roller 1. Self Adjustment welding rotator 10T capacity,22000lbs welding rotator. 2. One drive roller , One idler roller , Electric control system. 2. Automatic adjust the pipe diameter range 320-2800 mm. 3. Voltage : 380V 50Hz 3P or As required. 4. Control Way : Remote hand control box / Wireless hand control box. 5. Roller Material : Rubber / Steel / PU ( Polyurethane roller for Nonferrous Metals ) 6. Original : Wuxi China / WUXI SUCCESS MACHINERY EQUIPMENT CO., LTD supply the Pipe welding rotator.

  • Battery Charger

    Battery Charger

    Battery Charger Feature *Single-phase , portable battery chargers for charging lead-acid batteries with 12/24V voltage . *Equipped with ammeter . Protectedagainst overload and polarity reversal . *Equipped with selector normal or quick charging .

Welding Safety Equipment

  • Welding Helmet

    Welding Helmet

    Welding helmet are designed to protect the eyes and face from sparks, spatter and harmful radiation under normal welding conditions. Especially for the auto darkening welding helmet, its auto darkening filter automatically changes from a clear state to a dark state when an arc is struck, and it returns to the clear state when welding stops.

  • Welding Suit

    Welding Suit

    Welding suit has a wearable, insulaiton and fire resistance performance. The emphasis on the site are double skin and pot nails to strengthen the structure to provide a highly safe operating environment, with adjustable magic stickers can be inverted upright collar, can block the welding spatter, shoulder with a seam bar, strengthen the durability. Fire-retardant cotton collars are safe, comfortable and sweat-absorbent. The upper and shoulder position of the hand sleeve is in the inner part for easy discharge. The design of the front guard of the welding coat prevents the spatter from being splashed into the garment, the double skin and the pot nailing to prevent the tear.

  • Welding Glove

    Welding Glove

    Welding glove is a kind of welder's artificial glove, which can protect workers' safety and comfort , suitable for maintenance, Construction, Engineering, Plumbing, Assembly Industry, Automotive Manufacturing, Packaging, Electronics, Glass Industry etc.

  • Welding Glasses

    Welding Glasses

    Welding glasses are featured as scratch and impact resistant, with wide vision. It's fashionable and comfortable, with work safety and sports safety. Welding glasses are with flame retardant performance. It's applicable to gas welding, copper welding, cutting and other workplaces, especially suitable for: Labor insurance, industrial, military, medical, construction, field work and other fields.

  • Helmet Accessories

    Helmet Accessories

    Helmet accessories mainly include auto darkening filter lens, cover lens, filter lens and so on, which is a timely and effective substitute and supply for the wear of helmet.

  • Welding Apron

    Welding Apron

    Welding Apron is made of leather with strong, durable, flexible performance, with wear-resisting, heat insulation and fire-proof performance. It prevents cooking fume from roasting, can block the welding spatter. It's fire retardant, comfortable, and easy to wear and unload. It is used in the serious environment of welding spatter, which can protect the body of the user well.

<123>Total 109 Records
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

Message :